Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,824 mqtt jobs found, pricing in AUD

    I need C developer to build a code for boards like ESP. The major features is web interface, support mqtt.

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    10 bids
    MSP430 IOT 4 days left

    Implement the MQTT project with MSP430 using the ESP8266-01 module, I have 100$ and I want it in 7 days, DO not need a PCB design.

    $196 (Avg Bid)
    $196 Avg Bid
    21 bids

    A single tab should be added in the Web application which will have the option to edit, save and display the new user data., Frontend is already there, only the backend part needs to be implemented.

    $62 (Avg Bid)
    $62 Avg Bid
    4 bids

    ...At this stage of the project, I need to implement the initial configuration of the ESP32 device using Bluetooth, as the link (), in addition, implement the MQTT to access the ESP32 device via MQTT Broker on the internet and the redesign of the screens. I developed the app's initial flow to make it clear what the app needs to check once it's started by the user, after that it's simple, the app already knows the ESP32 device via mDNS or MQTT Broker, with that, the app must do HTTP GET/POST via mDNS on the local wi-fi network, or via request/response topic on MQTT broker. The design of the screens is to better sectorize, hierarchize the information and make the information more user-friendly. The app is already launched, and I have the initial p...

    $1242 (Avg Bid)
    NDA
    $1242 Avg Bid
    31 bids
    Build Embedded Firmware 2 days left
    VERIFIED

    Looking for an embedded engineer who can build firmware for the energy meter using HLW8012 and send the data to the AWS using MQTT. The hardware stack includes ESP32+SIM800L+HLW8012+Indicator Led's P.s: if someone can implement it using the M65 OPENCPU platform, preference will be given.

    $212 (Avg Bid)
    $212 Avg Bid
    6 bids
    Arduino Project 2 days left
    VERIFIED

    I need...program for hidden mesh communication over wifi + Bluetooth for ESP boards where one of the boards will be acting as MQTT Server + (MQTT Client for another MQTT Server) and in case the local MQTT Server (one of the boards) is offline, then the other boards will communicate through the mesh without affecting their communication and functions. All boards can be programmed OTA. The boards that have Nextion screen can update and send the graphic file OTA. Boards can communicate over Modbus (Wifi+serial) for the related points while the board with MQTT Server can report all the MQTT points over Modbus too. Web server with custom password for assigning the required parameters like wifi, MQTT, name, nextion file location for upload, arduin...

    $29 (Avg Bid)
    $29 Avg Bid
    6 bids

    I need someone with experience in connecting MQTT devices to the Thingsboard database. Needs background in modbus & json protocols

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    17 bids

    i need 3 python scripts the server subscribe to a topic. if it recieve JSON data it loads and execute a script (from file). the script send the result to other topic. check the pdf before you make a bid ... write "ireaditall" in your bid (other bids are ignored)

    $107 (Avg Bid)
    $107 Avg Bid
    6 bids

    Develop app that establish MQTT link between Lora Gateway and Thingsboard

    $259 (Avg Bid)
    $259 Avg Bid
    6 bids

    Hello, I have a Raspberry Pi with node-red and a local MQTT server that has been inactive for a bit and the MQTT server works with another local HMI appliance for data. I simply want to turn on the MQTT, make sure it's working with the local device's IP, and then move the project to a new Raspberry Pi that already has Node Red installed

    $86 - $144
    Urgent Sealed
    $86 - $144
    5 bids

    Hi Mikita V.,i have java mqtt rest problem solving kind of project , basically there is the program that checks the java program and following that to make the test file ,

    $216 (Avg Bid)
    $216 Avg Bid
    1 bids

    Ho maksim i have java mqtt rest probken solving kind of project , basically there is the program that checks the java program and following that to make the test file ,

    $216 (Avg Bid)
    $216 Avg Bid
    1 bids

    Hello, I have a Raspberry Pi with node-red and a local MQTT server that has been inactive for a bit and the MQTT server works with another local HMI appliance for data. I simply want to turn on the MQTT, make sure it's working with the local device's IP, and then move the project to a new Raspberry Pi that already has Node Red installed

    $134 (Avg Bid)
    $134 Avg Bid
    8 bids

    I need to visualize 2 sensors using aws-iot-core and grafana or google charts. Additionally i need to demonstrate a smart plug control which is connected also on same gateway. In near future we will develop a full solution which will include a web based dashboard and a mobile app. Is needed to be familiar with JSON, MQTT, AWS, javascript and Alexa. If you more familiar with GCP - google assistant is also an acceptable solution. Sensors are already connected to AWS and data are uploaded

    $258 (Avg Bid)
    $258 Avg Bid
    5 bids

    Looking to subscribe to multiple topics on multiple brokers and store all data in a single SQLite3 database. Simple UI required for inputting brokers/topics. Script to ultimately run on Raspberry Pi.

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    9 bids

    I installed MQTT(mosquitto) in a laptop of mine with windows OS. And i wanna send messages to ROS to another laptop of mine that uses Linux. So basically i wanna send messages from 2 different machines where one has Windows and uses MQTT and the other has LINUX and uses ROS . messages from MQTT to ROS and from ROS to MQTT.

    $122 (Avg Bid)
    $122 Avg Bid
    6 bids

    My project has three parts: Part one - A simple Progressive Web Application (PWA) calls Web API and gathers user information by questioning them with about ten screens. Deadline at the end of May 2022. Part two - A native Mobile Android Application collects data by BLE connection from a device and sends it to a remote resource on Internet through MQTT protocol or by calling a Web API. Furthermore allows the user registration (not Authentication) to a backend solution (already available) and integrates the previous PWA as a Web view. Deadline at the end of August 2022. Part three - To port the mobile application of the previous part two on iOS. Deadline at the end of November 2022.

    $7881 (Avg Bid)
    $7881 Avg Bid
    46 bids

    we want to send MQTT message from PHP laravel to esp8266 without using third party library we already have PHP code ready we just need hiveMQ code integration and ESP8266 code

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    9 bids

    ...for solving the most challenging problems in all modules of the product. ** Looking in Candidate: Previous working experience as a MERN Stack Developer for (2-3 years) In depth knowledge of NodeJS, ExpressJS or ReactJS. Good understanding of the overall MERN stack. Excellent interpersonal and communication skills. Ability to work in a fast-paced team environment.     ** Good to Have: MQTT protocol/IRC protocol Redis Database C/CPP basics [Removed by Freelancer.com]...

    $235 - $706
    Local
    $235 - $706
    0 bids

    Ready to go platform that supports major protocols like zwave and zigbee Scalable and have deployed already Needs full team to link to mqtt and apps and front end

    $176206 (Avg Bid)
    $176206 Avg Bid
    23 bids

    We are using Field Sensors capable of sending data via MQTT or HTTP to the Cloud . We are looking for Cloud Developers to develop the Dashboard for the Monitoring on Thing Board . Number of Devices - One , Number of Parameters - 4 nos. Project Completion Time required 1-2 Days.

    $30 (Avg Bid)
    $30 Avg Bid
    5 bids

    ...developed separately based on MQTT data sent to the MQTT broker from the PLC. Programming is for C2-03CPU CLICK PLUS PLC, with EA3-T4CL HMI, and C2-08DR-6C discrete/analog combo module. Need HMI display, setup, configuration, and control for: Qty-4: 4-20mA analog transducer inputs (2 for tank level, 1 for pump pressure, 1 ORP sensor) Qty-2: Analog outputs: Just mirroring one of the analog inputs to a 4-20mA output. Qty-4: Discrete Inputs (sensing valve position indicators and manual triggers) Qty-4: Discrete Outputs (controlling up to 4 relays based on thresholds & timers. System-Level Functions: The device needs to be able to be set-up by customers with no PLC knowledge through the HMI. Need to be able to set Network parameters (Wi-Fi, Ethernet, DHCP, Static IP, MQ...

    $1081 - $2161
    Sealed NDA
    $1081 - $2161
    11 bids

    Hi Jack Solutions, I noticed your profile and would like to request advisory service only for node-RED (the mqtt node). We can discuss any details over chat.

    $22 (Avg Bid)
    $22 Avg Bid
    1 bids

    An iot app basically for home automation. - User login and verification - Detecting device - Dashboard UI - Will be working over mqtt protocol This will be prototype app for hardware testing

    $465 (Avg Bid)
    $465 Avg Bid
    8 bids

    I have a program monitoring my LiFEPO4 battery BMS via MQTT running on an AWS Lightsail Node.JS environment. I want a bit of help with the flow to fix some bugs. I also want to password protect my app , and also update my AWS Lightsail (Bitnami ?) VM to imporove its security. I envisage a Zoom call for about 1hr to discuss and hopefully fix most things. (update: I'd like to do this within 24hrs , preferably in the next 3hrs)

    $39 / hr (Avg Bid)
    $39 / hr Avg Bid
    11 bids

    My company is developing a companion app for an electronics device (an electric vehicle charger). A React Native app is functional today, but has some very minor bugs, and misses a few ...for an electronics device (an electric vehicle charger). A React Native app is functional today, but has some very minor bugs, and misses a few features. This initial small project will be used to verify if we can work together - If we can, I expect much more work over time on this project. You must have access to Android and iOS hardware, so that builds can be tested on device. Experience with MQTT protocol is a plus, as the majority of app communication happens through this protocol. However, it is not a strict requirement as much of this is already in place. See attached description of init...

    $63 (Avg Bid)
    $63 Avg Bid
    6 bids

    need an epert esp32 programmer to do the following task when it receive a mqqtt topic like motor/1 it will run motor 1 and listen for specific pin when it gets high it will stop rotating the motor (set pin low) and send a message via mqtt confirm/1

    $42 (Avg Bid)
    $42 Avg Bid
    12 bids

    Stable GPRS Connection MQTT Connection with JSON Payload GPS Connection OTA Update over the AIR REST API Setup

    $23 (Avg Bid)
    $23 Avg Bid
    2 bids

    I need a phyton code so I can use with conjuntion of CRONTAB -e so it can run every month and keep my MQTT running without any stopping

    $35 (Avg Bid)
    $35 Avg Bid
    9 bids

    Hi Mestek, I saw that you can do a project similar to one I am interested in. I want to connect an Arduino Mega 2560 with a SIM800c module to AWS IoT core using the MQTT protocol with authentication and be able to send and receive messages between the Arduino and AWS. I am seeing that Mexico has very bad 2G reception, so I was looking into other modules with 3G or 4G as well. I'd like to know if you recommend something for this as well. Thank you! Leonardo

    $36 (Avg Bid)
    $36 Avg Bid
    1 bids

    We are running an own MQTT broker Mosquitto on a VPS but have some issues. Have a need for an MQTT/Mosquitto expert that can help us to do a new setup of an MQTT broker.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    5 bids

    We are looking for a developer to work in a project based on ESP32 microntroller. Software must be coded on micropython. Experience working with micropython on ESP family, MQTT using TLS and OTA updates are required for this job. Features requested are: 1. Multiple Bluetooth BLE sensors reader and MQTT client with TLS 2. Relay controller 3. WiFi connection to AWS to MQTT broker with TLS 4. OTA Updates 5. Web captive portal to engage device to local WiFi 6. Bluetooth connections manager 7. Four control blocks that actuate corresponding outputs depending on BT readings and some thresholds. This project accepts a maximum delivery time of 60 days.

    $1369 (Avg Bid)
    $1369 Avg Bid
    5 bids
    $130 Avg Bid
    1 bids

    Hi, Thanks for reading. We have a project that has a number of elements which we are hosting on a web server. The elements include: 1. Asterisk ip PBX 2. Kamailio SIP Server 3. A database for the above 4. An MQTT Broker 5. A web server to support all the services. The system is an emergency call system fort he elderly and we need to be sure we have resilience We need a person to review from the outside and make recommendations on how we make the system scalable and robust. You will need knowledge in: - Asterisk - kamilio - PHP and web servers - MQTT Brokers This is a short project but we see further long term work in helping us as we add more features. Thanks for reading

    $357 (Avg Bid)
    $357 Avg Bid
    16 bids

    We are looking for a developer for our Activemq ( MQTT ) project. He must be familiar with MQTT and also have experience with webRTC and P2P Messanger. The application should be written in Flutter/Dart for cross platform capability and for the native Android part Kotlin should be used. i.e. as much as possible Flutter/dart and as little as necessary Kotlin to get an optimal performance on Android He must use an Android phone himself to be able to test the application extensively with the team. He must have excellent documentation skills of his codes, so that any developer can very easily connect at the code level. He must be a good communicator and have very fast response times and take responsibility for his work. We work with Github & Slack

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    29 bids

    There will be 12 LEDs. During a round, each LED will light a single color out of three. These colors will be red, blue and white. The player will have three buttons to press and he will have to indicate which was the priority color. If it hits, it moves on to the next round. If you miss, the game is over. To make the game more difficult, at each round, during an interval of 5 seconds, the LEDs must flash faster and faster. I need this prototype ready in the next 12 hours.

    $53 / hr (Avg Bid)
    $53 / hr Avg Bid
    11 bids

    Hi, Thanks for reading. We have a project that has a number of elements which we are hosting on a web server. The elements include: 1. Asterisk ip PBX 2. Kamailio SIP Server 3. A database for the above 4. An MQTT Broker 5. A web server to support all the services. The system is an emergency call system fort he elderly and we need to be sure we have resilience We need a person to review from the outside and make recommendations on how we make the system scalable and robust. You will need knowledge in: - Asterisk - kamilio - PHP and web servers - MQTT Brokers This is a short project but we see further long term work in helping us as we add more features. Thanks for reading

    $311 (Avg Bid)
    $311 Avg Bid
    9 bids

    We have already android app which is built on custom mqtt Now we are going to use aws iot core In which we have to use aws iot sdk for integration with android app So we need help for aws iot core integration at app side Hardware side it's ready

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    1 bids

    Requirements 1. MQTT broker MQTT broker is required to communicate with machine 2. Payment Get-Way Payment get-way to receive Payment from Machine Machine has Static QR code. When payment done on that QR code Acknowledgment send to machine by server.

    $526 (Avg Bid)
    $526 Avg Bid
    5 bids

    This Project is About Creating MQTT Server That Communicate thru Port 1883 with Smart Thermostat. Then Collect the Data From Thermostat thru Pre-programmed API and Store it in (Web cloud Sever) Then Begin Display and Give Commands thru Graphical Interface (you need to Design it)

    $584 (Avg Bid)
    $584 Avg Bid
    9 bids

    I would like an advice on which PLATFORM should I use to implement an upcoming project. I need to implement a home automation using Alexa, Remote patient monitoring and elderly care. I need to upload data from SPo2 meters, Heart pressure meters etc for remote patient monitoring. I will use emergency button wearable for e...which I could get analytics, for example how many times during week a specific motion detector was triggered, etc. Via this dashboard I should also to be able to read-display all sensor states. The freelancer that will come up with the best suggestion, will be able to work on the upcoming project for those described above. Alexa, home assistant cloud, AWS iot core, IFTTT, AYLA, thingsboard , MQTT, are “things” that would be appreciated if you ar...

    $47 (Avg Bid)
    $47 Avg Bid
    1 bids

    Hi, I need help with the configuration of the MQTT server on Ubuntu. I will share more details in the chatbox.

    $42 (Avg Bid)
    $42 Avg Bid
    6 bids

    Modify this to add functionality to Include mqtt, xmpp, grpc,integrate to secrets vault(Azure, googlekey, aws etc), redis for state management.

    $350 (Avg Bid)
    $350 Avg Bid
    6 bids

    Get JT808 devices data (JT/T808 over TCP sockets) Insert data into DB (PostgreSQL) Send config changes to devices (if required). Best if done in a scripting Language (Python, Perl) No MQTT (direct from device to DB) No Web interface required (use config files in JSON, ini, etc.)

    $853 (Avg Bid)
    $853 Avg Bid
    7 bids

    Build a Super simple Flutter App with login and 3 - 4 similar pages toggle buttons to send messages to mqtt topic

    $42 (Avg Bid)
    $42 Avg Bid
    5 bids

    We need an expert who knows how to setup a secure MQTT server and allow for certificate authentication

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    2 bids

    Hi, We have a woking device with MQTT API documentation. The task is to make this device communicate with our web application via MQTT. This is immediate task.

    $203 (Avg Bid)
    $203 Avg Bid
    5 bids

    Develop version 2 of MQTT-to-Modbus/TCP bridge

    $268 (Avg Bid)
    $268 Avg Bid
    4 bids

    Looking for Tuya custom chip WB3S programmer. We need to make a customer firmware for the chip which is similar to esp8266 12e. It will be used for MQTT 3 channel switch

    $213 (Avg Bid)
    $213 Avg Bid
    9 bids

    I need an app for my cyber internet cafe , i need to install the app to 5 pc and control them over MQTT (maybe u can suggest another protocol if u think there is better way for this ) If the clients pay money i can allow 1 pc to work for example 15 minutes or more. - after time pass, pc will be locked -users need just to play games there , all other functions and apps need to be disabled check more detailed info here:

    $268 (Avg Bid)
    $268 Avg Bid
    8 bids