ATXMEGA sviluppo IOT -- 2

EASIOT Requirements:

What we need:

The MCU used on the board is an ATXMEGA128A3AU

We need a porting of the Arduinio IDE and a working bootloader that can be wrote via usb port.

We also need the following Arduino libraries:

1) RF interface handling via AT86rf212b + CC1190 (Atmel tranceiver module + TI power frontend) in particular, we need:

a. Porting of Atmel Bitcloud library with working fullmesh connection capability and the possibility to assign END-DEVICES, ROUTER and COORDINATOR roles to devices.

b. “Network” and “ID” values need to be assignable

2) WIFI interface management (generic chip controlled via AT commands) in particular, we need:

a. Connect /disconnect survey

b. capability to switch the module on and off

c. Open client tcp/udp connections

d. Open TCP/UDP server (listening for connections)

3) Creation of MQTT client module (there is already one working with Arduino + ethernet shield)

Documentation provided on request:

- Circuit schematics

- Wifi module specs and documentation

- datasheets of modules used on board

MILESTONE:

1) Working Bootloader e ARDUINO IDE

2) RF interface management as per point 1)

3) Wifi interface management as per point 2)

4) MQTT Client as per point 3)

C Programming

Project ID: #6620952

About the project