Convert Plans to AutoCad & Design of Solar Panel Roof Layout
$30-250 AUD
In Progress
Posted about 12 years ago
$30-250 AUD
Paid on delivery
Stage 1
Fully convert the provided house and a detached garage plans to AutoCad format.
The buildings must be sited on the drawing as they exist on the land relative to one another. Note that the house and detached garage are already built and you will be provided with more accurate measurements so that the two structures can be correctly sited relative to each other on the plan.
Stage 2
Once the paper plans have been converted to autocad you will then be required to design the solar panel layout. You must also show the mounting details of the 66 Solar Panels on the northern facing roof surfaces. A technical document showing the mounting system to be used is attached to this project. Please note that the roof type is Tin/Colourbond steel.
It is anticipated that not all 66 solar panels will be able to be accommodated on the house roof, so the north facing roof of the detached garage will need to be utilised also.
The optimal elevation of the solar panels is 27.8 degrees, so the pitch of the panels on the main roof at 25 degrees is acceptable and does not require any further elevation. However any panels placed on the Northern Veranda which has a 9 degree roof pitch will need to be elevated by another 19 degrees and panels placed on the detached garage roof would need to be elevated by another 13 degrees.
The solar panel sizes are detailed on the attached specification sheet. When spacing the panels a gap of 15mm between the edge of each panel is [login to view URL] panels do not butt up against each other. Consideration must be also be given to maintenance access to the panels so that once constructed it will not be too difficult to access a panel to replace it.
Once the job is completed the auto-cad files must be provided together with A3 size pdf format drawings to show the plans and also a 3d rendered pictures of the proposed solar panel installation at various view points.
Photos will be provided to you of the existing house and shed so that your 3d representations can be as realistic as possible.
Stage 3
Once the drawings have been provided to us, if any alterations to the solar panel layout are required you must be prepared to alter the drawing and provide updated autocad file and 3d pdf views as part of this project and not at an additional cost. It is anticipated that there will be minimal adjustments required.
When bidding please provide examples of any similar work that you have recently completed.
The Maximum Budget for this project is $125 AUD (which are slightly better value than US Dollars!) I will be awarding the project based upon the lowest bid and proven experience.