Cancelled

$150 ELECTRONICS ENGINEER TO DESIGN HAND HELD ELECTRO-MAGNETOTELLURIC DETECTOR

I need a hand held detector designed to detect all readings for Electro-Magnetotelluric (EMT).

You must be an electronics engineer to work on my project. You must understand all theories and principles about this type of metal detector.

You must be 100% sure you have the skills needed to complete my project on time.

You will need to sign my project agreement and NDA.

You will complete the project within 30 days.

## Deliverables

ELECTRONICS ENGINEER NEEDED TO DESIGN ELECTRO-MAGNETOTELLURIC DETECTOR

I need a detector designed and built to detect all readings for Electro-Magnetotelluric (EMT), and you must provide me the detector output signals so I can have a software program made to produce a 3D image from all the Data the detector outputs.

You must be an electronics engineer to work on my project. You must understand all theories and principles about this type of metal detector.

You will complete the project within 30 days.

The detector will probably need 3 receivers for electric readings and 3 receivers for magnetic readings. So it will be able to get a great orthogonal picture of the elements. Electric field sensor & Total field Magnetic sensor, which takes readings from three simultanious directions to get an accurate orthogonal picture. This is for a hand held. It will not have any leads in the ground. All measurements must be taken from the air, while walking, driving with the hand held or mounted detector. The detector will also need to have a speaker and headphone jack for sound, and instrumentation built into the detector to use without a laptop computer plugged in just so I can do some on the move spot detecting without saving the data or seeing it in 3D.

The metal detector must be able to output signal through a USB port that can be used by a computer program. The output must be the correct voltage, amperage, etc... for a computer to be USB plugged into the detector to 3D graph and use all the readings the metal detector puts out.

You will provide me all the uotput data information so I can have the data modeled to be able to make 3D measurement capabilities as a result of the data measurements obtained from the electric measurements and magnetic measurements of natural electromagnetic fields, and all the readings the detector gathers.

It will have receivers to get the returns of all the fields of the targets so it can identify the mineral and metal targets.

You will need to make me an easy to follow schematic and design to follow so I can build it. You must list out all parts needed. The parts must be easy to get from an electronics store. You will design the antenna's and everything that detector needs. The detector must be a simple design capable of accurately giving me all the data I need.

You will need to teach me and explain the schematic to me so I fully understand it and how to build it, including how to build and easily tune the antenna for cheap. You will need to have Skype and team viewer capabilities so we can communicate online about the project.

Electric field sensor & Total field Magnetic sensor, which takes readings from three simultanious directions to get an accurate orthogonal picture.

It must be able to provide field strength, frequency in Hz, magnetic readings, and magnetic field strengths. And strength of all fields, including combined readings.

You will provide th edetector output information so I can have a software program to model the data to be able to make 3D measurement capabilities as a result of the data measurements obtained from the electric measurements and magnetic measurements of natural electromagnetic fields, and all the readings the detector gathers.

Must have USB output to send all the data collected to a software program to turn the data into a 3D graph on a windows based computer progam.

The output must be in the form of a a regular USB plug to connect to a laptop computer.

The detector will read all frequencies from .01 Hz to 20,000 Hz and we will talk about the other signals and reading ranges needed.

It must be sensitive, accurate, and precise. You will need to design the casing for the detector to protect the circuit, battery, and components from rain, dust, moisture. It must be light weight and handheld. And ergonomically correct for your hand and arm to use and carry. And to be mounted. to a vehicle. And outlet plug adapters to allow me to plug a USB connector from my computer into the detector. The detector must be able to use batteries and be able to be plugged into a car outlet and USA house outlet.

It will have receivers to get the returns of all the fields of the targets so it can identify the mineral and metal targets.

The detector must be able to output signal through a USB port that can be used by a computer program. The output must be the correct voltage, amperage, etc... for a computer to be USB plugged into the detector to 3D graph and use all the readings the metal detector puts out.

You will provide me a complete list of all components, and parts needed, and were to get these components for cheap.

The entire project will need to be completed within 30 days.

You will give me updates on Monday, Wednesday, and Friday. I don't work on Sunday and I don't reply to emails on Sunday either.

I will own all patents, and copyrights to the detector, antenna's, and everything related to the detector.

You must not use any patented designs in my detector that are owned by someone else, it must be designed from the ground up and new.

You will provide any documents and information that may be needed for submitting a US patent or US copyright.

You must work fast and accurately to complete this detector on time for the project deadline. Please provide me a time schedule for completing each items that needs to be designed and built.

I will release the escrow when the detector design, antenna's, schematic, information, and training is on how to build this detector is completed, and accepted by me.

You will provide me a complete list of all components, and parts needed, and were to get these components for cheap.

You will not share this detector its design, plans, pictures, video, or any information about this detector with anyone. You will need to sign my NDA if you are awarded the project, and my detector, and software developers agreement.

You must work fast and accurately to complete this detector on time for the project deadline.

I will need weekly updates about the progress of my project.

Skills: Electronics, Engineering

See more: windows 3d model, which graph to use for data, video to 3d model, video made from pictures, us car online, usb c 3d model, turn picture into 3d model, to hand out, the principles of design, the parts house, strengths list, store 3d model, spot light 3d model, spot 3d model, speaker design online, sound design needed, sound by design, software design principles, software design components, skills needed for engineering, simple escrow agreement, simple 3d model online, signal 3d model, s&c electric, project graph designs

About the Employer:
( 105 reviews ) Logandale, United States

Project ID: #2773335