Grill of STL files to create the Olympic Stadium in Montreal and its area

Closed Posted 4 years ago Paid on delivery
Closed Paid on delivery

Introduction

The goal of this project is to create a scale model of the Olympic Stadium in Montreal with the neighborhood near the zone, divided in a grill of several STL files. We are a 3D printing agency and have some customers that need architectural scaled models. This one will be used for our own purpose to present our services with prospects. If everything goes well, the freelancer that will accomplish this first contract with us will be called back for other similar jobs in the near future.

Bonus : we will pay an extra if you can take some (nice) screenshots during the process ! They will be used on a section of our website to briefly explain the process.

Instructions

The map

We are open to new ideas, but we think that starting with this tutorial would be easier than from any other tools or software :

[login to view URL]

[login to view URL]

For this one, we will need the topology, the roads, all the layers, the false height to 20 meters and everything like explained in the tutorial until step 19. We want the road visibles, so “Mesh road” should be checked before generating the map, but other solution may be accepted, as long as we can clearly see the road on the final .STL

Everything must be 3D printable-friendly and “repaired” as mentioned in the tutorial.

To be able to print the topography well, we will probably need to add one flat layer of material that will serve as a base for the whole architectural scale model. It will be useful for the tile system (explained below). This layer should be 10 mm.

The main building

As mentioned earlier, the main building is the Olympic Stadium of Montreal. We would like to have it in high resolution, so we found a HD model of it (file attached in this project).

The actual stadium on the original map must be replaced by the HD one. It’s is very important to scale it at the right dimensions.

Few pins must be added (below the model) in order to clip the stadium when we will assemble the model and on the map. We’ll need to elaborate a simple and discreet male/female connectors system.

A small hole (10mm) must be added to place small wires. It will allow us to put light insides the stadium tower.

Make sure the tower of the stadium is empty.

Optimizing the map in tiles

We want the scale model divided into many tiles. Each tile will have connectors that we already made (files attached in this project). On the tile that will land the tower, it is important to add a small whole of 10mm as an entry for the wires, well aligned with the entry under the tower of course.

On the side of the scale model, remove the remaining connectors (if there are any).

Each tile can go up to a maximum of 290 x 290 x 390 mm. Once scaled, if the stadium tower is too high, we will split the model in two and glue it after printed.

Final work

At the end, we should have :

STL files of all tiles

STL file of modified stadium

All project files (raw) in case we have to modify something

And this should be everything required for us to 3D print this project.

3D Modelling 3D Rendering 3D Animation 3ds Max Building Architecture

Project ID: #21941865

About the project

12 proposals Remote project Active 4 years ago

12 freelancers are bidding on average $457 for this job

avtar1073

Ready to design the 3D model of the Olympic Stadium in Montreal same as per your requirement , I have checked all the details thoroughly along with attachment files , Please contact me will start your work immediately More

$250 CAD in 5 days
(718 Reviews)
8.9
inderar88

Hi, I am ready to make the Olympic Stadium in Montreal 3d print ready STL for sure. Please do contact me will start the work immediately. Link for the portfolio:- https://www.freelancer.com/u/inderar88 I have exp More

$250 CAD in 4 days
(835 Reviews)
8.9
moshchan

Hello! I am a Mechanical Design Engineer. I would like to propose you the following services: - 3D Modeling (parametric CAD / NURBS, polygonal); - 3D Rendering; - CAD/CAM Design (2D & 3D); - Industrial Design; - More

$500 CAD in 7 days
(146 Reviews)
7.5
muhammadbilal786

Hi Thanks for posting a project I see your project details please message me and let know more about your project If you need any example work I will provide you Thanks Regards

$750 CAD in 5 days
(91 Reviews)
6.5
whitevulture

[ https://www.freelancer.com/u/whitevulture.html ] I consider myself a 3D talented artist,With over five year’s experience of working on modeling, Rendering, texturing,interior and exterior designing,Character design More

$250 CAD in 3 days
(43 Reviews)
6.0
ArchAls2Gd

Dear Client, We are a team of practising Architects and Designers both  on and off freelancer. Please do give us a chance at working on your prestigious project. We will ensure delivery of design and drawings as per e More

$250 CAD in 7 days
(76 Reviews)
5.5
theodornacev

Hello, I'm a 3D Printing expert with 5+ years of experience. My portfolio includes 20 vehicles or printing, 400 planes and warships for injection moulding, as well as 5 projects similar to the one you've listed her More

$575 CAD in 30 days
(9 Reviews)
4.6
Valuesolutions

Hello, i have read the details provided..please contact me to discuss more on the project deadline and some other few things

$250 CAD in 7 days
(3 Reviews)
4.2
logoseo

hi i can recreate your files with 3d printable files please send me message for discuss details and see my portfolio thanks

$600 CAD in 3 days
(6 Reviews)
3.6
amrelhamamy4

I am an architect with experience in the field I can design work required the highest accuracy and quality I have worked in similar projects. I am happy to deal with you Relevant Skills and Experience I am an architec More

$555 CAD in 12 days
(0 Reviews)
0.1