CAN Bus data convert to other CANBus data

$30-250 USD

Completed

Posted

8 months ago

$30-250 USD

Paid on delivery

I have two modules (old and new). OLD one (engine ECU) send specyfic canbus data, but NEW one module (dashboard) expect different format CanBus data to display data from ECU. I need something like canbus converter-bridge to convert old data (ID and message) to new ID and message. I looking for freelancer, who have hardware for test (simple arduino's canbus shield + uno enough) and UNDERSTAND this job. To convert 6 IDs with data to other 6 IDs with data. I put similar job few days ago and wait for freelancer's response. I would like run two similar projects together, so I looking other freelancers to new job. Before create milestone I expect "proof of concept" sample data conversion to test under canbus sender-reader (sketch to any platform or hex). I have all nececery data explanation for each ID, and message sample. EXAMPLE FRAME MS_312h (0x00000312) Sample data: 08 1F 08 1E 0A 90 08 20 SIGNAL M_STA, OFFSET: 3, LEN: 13, DESC: Motor torque static, DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: 0.0) SIGNAL M_MAX_ATL, OFFSET: 19, LEN: 13, DESC: Motor Torque Maximum incl. [login to view URL], DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: 0.0) SIGNAL M_MAX, OFFSET: 35, LEN: 13, DESC: Motor torque maximum, DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: 0.0) SIGNAL M_MIN, OFFSET: 51, LEN: 13, DESC: Motor torque minimal, DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: 0.0)

Arduino

Microcontroller

C Programming

Automotive Engineering

STM32

Project ID: 37195920

About the project

15 proposals

Remote project

Active 8 mos ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

Awarded to:

@goharriz

Hello Krzysztof, Can you post an example of the expected input frame and the expected output frame to get a better understanding of what you need? Thank you.

$199 USD in 10 days

5.0

(31 reviews)

5.5

15 freelancers are bidding on average $190 USD for this job

@pankajauengg

Hello! I already worked on similar thing. I also developed hardware for a client. It takes data in one side, modify some parameters and push into main stream. Kindly come over chat and plan the project

$200 USD in 7 days

4.7

(98 reviews)

6.4

@MMG2019

Hi, I have built an app for editing ECU binary file. Also developed a tool for BOSCH and reading/writing .BIN hexadecimal (8bit, 16bit and 32bit). I can help you, but more details required. Best regards, Michael

$250 USD in 2 days

5.0

(3 reviews)

5.1

@engrhassanwali

Hi there! My name is Hassan, and I am a specialized freelancer with extensive experience in the field of tech. I understand that you are looking for someone to help you convert CAN Bus data from an old ECU module to new data that can be displayed on a dashboard module. I specialize in a wide range of technical areas, including Mechatronics, Robotics, Computer Science, Electrical Engineering, Control Systems and Signals and Systems. With my extensive knowledge and experience in these fields I am able to provide solutions that meet all your requirements. I believe that my skillset makes me ideally suited to tackle this project. My expertise covers a broad spectrum of technical subjects such as Mechatronics, Robotics and Computer Science which will ensure that all aspects of the project are covered. Additionally I have software skills such as Python which will enable me to efficiently deliver high quality solutions. I would be delighted to discuss further how we can work together to achieve outstanding results for this project. Please feel free to reach out to me if you have any questions or would like more information about my services.

$250 USD in 7 days

4.8

(6 reviews)

4.1

@tshibsamuel477

Hi there, I appreciate your project description regarding the need for a CanBus converter-bridge to adapt data from an old module to meet the requirements of a new module. It's clear that you're seeking a freelancer who not only understands the technical aspects but also has the necessary hardware for testing. I am Samuel Tshibangu, a mechanical engineer with expertise in mechatronics, based in Tunisia, and with almost half a decade of experience. While my background primarily revolves around electronic board design, I have a comprehensive understanding of hardware and software integration, which aligns with the requirements of your project. I have successfully worked with similar components and have a proven track record in creating solutions that involve data conversion and signal processing. Your project's goal to convert 6 IDs with data to other 6 IDs with data is well within my capabilities. Before moving forward, I completely understand your need for a "proof of concept" sample data conversion. Rest assured, I have the necessary hardware, including Arduino's CanBus shield and Uno, to conduct such tests promptly. Please provide me with more details, and I will be more than happy to assist you in bringing this project to fruition. Feel free to reach out for any further information or clarification. Best regards, Samuel Tshibangu

$140 USD in 1 day

5.0

(13 reviews)

3.6

@merinsinha

I can do it. As 9+ years experiences in these field. I can give good quality work. I have read the guidelines of your work.I believe that i can provide you the best quality works you are anticipating from this platform give me a chance to show you the best i can do at your service.

$190 USD in 7 days

5.0

(4 reviews)

2.9

@Techalchemy

Hi Sir, As a highly skilled and experienced, I am confident that I can provide the high-quality work you need, but i have some doubts regarding the same, lets discuss in detail make it clear & then i am ready to start the work right away.

$140 USD in 7 days

5.0

(4 reviews)

3.0

@Muhammadzeesha59

Hello , Sir/ Mam I read your requirement and also check attachment i will do that. Please come on chat we will discuss more about this. I believe that my skill set makes me the ideal candidate for this project I will be waiting for your reply . Thank you

$40 USD in 1 day

5.0

(2 reviews)

1.5

@hayat38402

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

$250 USD in 7 days

0.0

(0 reviews)

0.0

@SourceOasisBPO

Dear Krzysztof D., I hope this message finds you well. I have carefully reviewed the requirements for your project regarding converting CAN Bus data from an old module to a new module. With my 4+ years of experience in C Programming and expertise in microcontrollers such as Arduino and STM32, I am confident in my ability to deliver this project with perfection. I understand the need for a canbus converter-bridge to convert the old data (ID and message) to the new format required by the dashboard module. I have the necessary hardware, including a simple Arduino's canbus shield and Uno, for testing purposes. Before proceeding further, I would like to clarify any questions or concerns you may have. Please feel free to connect with me in the chat, and I will be more than happy to address them. I have all the necessary data explanations for each ID and sample messages. To ensure your satisfaction, I can provide a "proof of concept" sample data conversion for testing purposes before creating any milestones. Thank you for considering my proposal. I look forward to the opportunity to work with you on this project. Best regards, Christopher

$140 USD in 5 days

0.0

(0 reviews)

0.0

@shivpps9543

This project will be completed as soon as possible, all the desire requirement will be fulfilled. OLD one (engine ECU) send specific canbus data, but NEW one module (dashboard) expect different format CanBus data is to display data from ECU. and to convert 6 IDs with data to other 6 IDs with data.

$340 USD in 10 days

0.0

(0 reviews)

0.0

@DevBench

Hi, I hope this message finds you well. I've carefully reviewed your project description, and I'm excited to offer my assistance. With over 8 years of experience in working with CanBus data and hardware like Arduino, I'm confident that I can provide you with the expertise required to create the canbus converter-bridge. To clarify the requirements, I kindly request the following information: 1. Could you provide more details about the specific hardware and software platforms you are using for this project? 2. Do you have a preferred timeline for completing this canbus converter-bridge? 3. Could you share more information about the expected deliverables and milestones for this project? 4. Have you already received responses to your similar job posting, and is there any specific coordination needed between the two projects you mentioned? If you have any questions or would like to discuss pricing and timeline, please feel free to connect with me in the chat. I am here to assist you in creating a canbus converter-bridge to convert the old CanBus data to the new format, ensuring a successful project outcome.

$165 USD in 7 days

0.0

(0 reviews)

0.0

@congbinh1989

I made canbus on AGV, I used PIC18F4580 and PIC18F2580. My project is to communicate 5 chips together. I understand your request. Let's discuss further, please text me

$250 USD in 10 days

0.0

(0 reviews)

0.0

@Sidrairfan078

Hello, I hope you are good. I just saw your job posting and I am really interested in this project. As per my experience and skills this job completely fits. I have 5+ year experience doing similar jobs regarding to above mentioned skills Automotive Engineering, STM32, Arduino, C Programming and Microcontroller. You can check my portfolio as well: https://www.freelancer.com/u/Sidrairfan078 Lets start chat, So we could discuss it in details and finalize everything. I will deliver you in best possible way. Thanks! Sidra

$155 USD in 8 days