Plc jobs

...Below is the complete combined PLC Programming Requirement Specification separated into two PLC systems: 1. Booster Pump PLC System 2. Lighting Control PLC System You can copy and send this directly to the PLC programmer. ⸻ FUNCTIONAL DESIGN SPECIFICATION (FDS) BUILDING PLC CONTROL SYSTEMS ⸻ SYSTEM 1 AUTOMATIC WATER BOOSTER PUMP CONTROL PLC 1. System Description The PLC shall control and monitor an automatic constant-pressure water booster system. The objective is to maintain stable building water pressure using VFD-controlled pumps, automatic staging, pump rotation, protection, alarms, and HMI monitoring. The system shall operate automatically using pressure feedback from a Modbus RTU digital pressure transmitter. ⸻ ...

I’m upgrading a machine line that relies on two control...cds files, I/O list, functional spec). From there, I need clean, well-commented ladder or structured text that drives reliable machine control, compiles error-free on both platforms, and is easy for my maintenance crew to follow. Remote access for testing is set up through VPN, so we can run live simulations before I sign off on the changes. Deliverables • Updated and newly written code for both PLC families • Documentation pack: I/O map, change log, brief commissioning notes • Verification that every routine passes a dry-run simulation and live test without faults If you have solid experience juggling Fatek ladder and CODESYS tasks in the same project, I’m ready to share the files and sched...

I have a Fuji MICREX-SX system built around the NA0P32-C PLC and fitted with an NA0LA-RS5 two-channel RS-485 card. My immediate need is to get the communications side working for data collection, not complex process control. Channel 1 must act as the Modbus-RTU master, polling two existing slave instruments and bringing their values into the PLC. Channel 2 must behave as a Modbus-RTU slave so that a SCADA/HMI station can read mapped holding registers from the PLC. I already wrote most of the ladder code in SX-Programmer, but I would like you to review it, adjust register mapping if something is off, and handle all parameterisation of the RS-485 card. Once the settings are in place, I’ll open a remote session (AnyDesk or TeamViewer) during on-site commission...

I'm seeking a skilled PLC programmer and data analyst to automate energy management processes using Schneider systems. Key tasks include: - Monitoring energy usage - Controlling energy distribution - Optimizing energy efficiency Ideal candidates should have: - Experience with Schneider PLCs - Strong background in energy management systems - Proficiency in data analysis and automation Please provide relevant work experience in your bids.

Only For USA ( Texas preferable ) I need an experienced gas-turbine specialist who can log in remotely and walk me through diagnosing and correcting persistent startup problems and noticeable performance drops on one of our units. All symptoms point toward the control system, so I’m looking for someone who knows their way around typical turbine control architectures—think Mark VIe, PLC/SCADA integrations, sequencing logic, sensor calibration, and related HMI trending tools. Here’s what I expect once we begin: • A live remote session to review current alarms, trend data, and logic charts. • Clear, written recommendations (and if possible, revised logic files) that get the machine through a reliable start and restore baseline performance. &bull...

Category/Skills tags: Modbus, SCADA, Industrial Automation, Python, Node.js, IoT, PLC, Web Development Description: I need a lightweight Modbus TCP device simulator with a web-based control panel, used to test SCADA/automation software without real hardware. Core requirements: Modbus TCP server simulating up to 20 configurable tags (temperature, tank level, pump status, valve position, etc.) with both read and write support (holding registers, coils, etc. as appropriate). Must work with standard Modbus client tools (e.g., Modbus Poll, pymodbus client, QModMaster). Web control panel showing all tag values live — sliders for numeric tags, toggle switches for on/off tags. Changes from a Modbus client must reflect on the web page instantly, and vice versa (bidirectional sync)....

...user interface. * Prepare the project so it can later be connected to PLC/SCADA tags. At this stage, **PLC communication is NOT required**. The focus is on the HMI interface and navigation. ## Remote Development Requirement The project **must be developed directly on my computer** using remote access software such as **AnyDesk** or **RustDesk**. The AVEVA Edge project must remain on my computer at all times. Remote development is mandatory. ## Requirements * Proven experience with AVEVA Edge. * Experience developing industrial HMI/SCADA applications. * Strong UI/UX skills for industrial control systems. * Good English communication. * Ability to follow an existing design accurately. ## Nice to Have * Experience with PLC integration. * Experience with Modbus,...

I'm seeking an experienced Allen-Bradley PLC programmer for a manufacturing process application. The PLC will primarily be used to monitor sensors and alarms. Key Requirements: - Expertise in Allen-Bradley PLCs - Experience in manufacturing process applications - Ability to program PLCs for monitoring sensors and alarms Ideal Skills: - Proficiency in ladder logic and other programming languages - Familiarity with industrial sensors and alarm systems - Strong troubleshooting and problem-solving skills Please include your relevant experience and approach to the project in your bids.

Business Idea: SkillConnect – On-Demand Skilled Manpower Platform Vision To solve the manpower shortage in Waluj MIDC by connecting industries, factories, and local shops with verified skilled workers available for daily, temporary, or contract work. How It Works For Companies and Shops - Register on the app. - Select the required skill (Electrician, PLC Technician, Welder, Fitter, Helper, Machine Operator, CNC Operator, Forklift Driver, etc.). - Choose the number of workers and the duration (1 day, 1 week, or longer). - View worker profiles, experience, ratings, and daily charges. - Confirm the booking and make payment. For Workers - Create a profile with skills, experience, certificates, and location. - Upload identity documents. - Accept or reject job requests. - Rec...

...selection and integration of servo drives, proportional valves, sensors, and human–machine interface (HMI) components. **Key Responsibilities** * Design and integrate motion control hardware and feedback systems, including encoders and transducers. * Develop control strategies for precise, repeatable pipe bending operations. * Collaborate with internal teams responsible for 3D mechanical design and PLC programming. * Specify and commission HMIs that enable intuitive, programmable machine operation. * Support testing, troubleshooting, and final machine commissioning. **Qualifications** *Familiarity with motion control systems for industrial machinery. * Familiarity with servo systems, hydraulic proportional control, PLCs, and HMIs. Interested candidates should submit a...

...building-management installation and need a complete PLC-based electrical panel design dedicated to the HVAC side. The controller will run our chiller plant and the MCC that drives all circulation and condenser pumps, so the drawings must reflect real-world motor loads, interlocks, and safety devices rather than generic templates. Here’s what I’m after: • A full set of single-line and wiring diagrams, clearly showing every I/O point needed for temperature, flow and pressure feedback, as well as the hard-wired links to the pump starters in the MCC. • Panel layout and bill of materials, sized to house the PLC, power supplies, contactors, overloads and field terminals without overcrowding. • I/O list in spreadsheet form that I can import stra...

I need help with a ladder lab exercise on PLC programming. The exercise involves using Allen-Bradley RSLogix 5000. Ideal Skills and Experience: - Proficiency in PLC programming, especially with Allen-Bradley - Strong understanding of RSLogix 5000 - Experience with ladder logic design and troubleshooting - Background in automation or control systems Please provide a brief overview of your experience with similar tasks.

I need a skilled instrument technician to service Radar level transmitters, level switches and other field instruments and integrate Siemens PLCs with these sensors in the USA Key Tasks: - Install, maintain, and calibrate capacitive level sensors - Program and integrate Siemens PLC with level sensors Ideal Skills and Experience: - Proficiency with capacitive level sensors - Experience in Siemens PLC programming and integration - Strong background in instrument installation, maintenance, and calibration

I need a complete dashboard built in Mitsubishi GraphW...single Dashboard view populated with: • Graphs and charts • Indicators and gauges • Data tables I will supply the tag list and data source details; you handle the screen layout, bindings, and any scripting required inside GraphWorX. Please organise objects with clear naming conventions so future edits are straightforward, and optimise refresh rates to keep latency low without overloading the PLC or network. Deliverables • GraphWorX project file (.gwx) with all assets embedded • Any external script files if used • A brief hand-off note explaining data connections and how to add new tags I will test the build on our plant PC; once the dashboard updates accurately for at least one full...

...Develop a zenon SCADA application from project specifications. • Configure communication with the existing PLC. • Design professional SCADA screens. • Configure alarms, trends, and historical data. • Implement user management and role-based access. • Configure audit trail and electronic signatures. • Configure recipe management (if required). • Generate reports and event logs. • Support FAT and debugging. • Provide complete project source files and documentation. Required Skills: • Strong experience with COPA-DATA zenon Engineering Studio. • Experience in pharmaceutical or GMP-regulated industries. • Knowledge of FDA 21 CFR Part 11 and audit trail implementation. • Experience with PLC communicati...

I'm seeking a skilled professional to analyze and implement a data acquisition and monitoring system using the Siemens SIMATIC S7-1200 PLC and LOGO!. The primary goal is to retrieve and monitor data from: -the SD memory (for SIMATIC S7-1200) -LOGO! memory. Key Requirements: - Expertise with Siemens S7-1200 PLC and LOGO! - Ability to retrieve and interpret SD memory data Ideal Skills and Experience: - Siemens PLC programming - Knowledge of data monitoring tools - Problem-solving skills Please provide a detailed plan and timeline.

...SEW DHR21B card used to exchange data in both directions with an Omron CJ2M-CPU33, but since the drive was reset to factory settings the PLC can only read; every write attempt is ignored even though no error messages appear on either side. I can connect through both MOVITOOLS and CX-Programmer / Network Configurator, and I’ve already gone through the obvious network parameters yet I’m still not fully confident they match on both ends. Remote access to the on-site PC (and therefore to the live hardware) is ready whenever you need it for tracing, packet captures or online edits. What I need from you is a clear diagnosis of why the outbound data from the PLC is no longer being accepted by the drive, plus the corrections implemented and documented so the link...

I need a modular PLC program for a CNC machine with a Fanuc 0i-MF controller. Requirements: - Tool changer - Head changer - Material handling - Safety interlocks - Initial setup - Operational controls - Diagnostics and troubleshooting Ideal Skills and Experience: - Proficiency in Fanuc PLC programming - Experience with CNC machine controls - Strong understanding of safety protocols and interlocks - Ability to work with provided full documentation

Our manufacturing line in Malaysia is running on a Siemens PLC paired with a SCADA package that is already installed but only partly commissioned. I need an experienced Siemens specialist who can work in-person at the plant (no remote connection possible) for a short, offline engagement to get everything running smoothly. You will be expected to: • System troubleshooting and diagnostics – quickly identify faults on the existing I/O, drives and network, then verify stable operation. • PLC code development and updates – refine or rewrite the STEP 7 / TIA Portal logic so it matches the current process requirements, and leave commented, organised code. • SCADA system configuration – finish the WinCC screens, tags and alarms so operators have...

...that I am assembling in my workshop. The schematic must show every conductor, terminal, and protection device so an electrician can install and troubleshoot the system with confidence. Please include: • Power supply connections – incoming mains, isolation switch, fusing or breakers, and earth/ground paths • Control panel wiring – relays, contactors, temperature sensors, indicator lights, and any PLC or timer points • Safety mechanisms – emergency-stop loop, over-temperature cut-outs, interlocks for the distillation chamber, and grounding/bonding details Deliver the drawing in both PDF and the native CAD format you use (AutoCAD, EPLAN, or similar). Label all components, wire sizes, and color codes to meet standard residential practices. A b...

...need help creating a solid, production-ready program for a BRX PLC, model BX-DM1E-36ER3-D, that will interface with an SV2A-2040 drive. This is strictly a software-side assignment—no hardware wiring or panel design—so the focus is on writing and validating the PLC logic. Scope • Build the main ladder (or structured text, if you recommend it) in Do-more Designer so the PLC can read / write all required I/O, execute the drive commands, and manage basic fault handling. • Provide a clearly commented program file plus a short PDF or Markdown note explaining the tag list, state flow, and any parameters I may need to tweak on site. • Be available for one remote test session to step through the logic live with me; I can share the PLC...

Please Sign Up or Login to see details.

I need a skilled programmer to create an HMI and PLC program for a Mitsubishi system. The setup includes 100 digital inputs, 100 digital outputs, and 15 analog inputs. The primary goal is monitoring and control, with data types as required. Key Requirements: - Experience with Mitsubishi HMI and PLC programming - Familiarity with environmental engineering applications - Ability to implement robust monitoring and control systems Ideal Skills and Experience: - Proficiency in PLC programming languages - Knowledge of environmental data parameters - Strong problem-solving and system integration skills Please provide relevant experience and approach in your bids.

I run a production site equipped with three-phase motors, PLC-controlled panels, variable-speed drives and high-power distribution boards. To keep everything operating safely and with minimal downtime, I need an electrotechnician who can take charge of maintenance on these industrial systems—from drafting a preventive plan to hands-on fault-finding, component replacement and efficiency-boosting upgrades. You should be fully at ease with industrial-grade wiring, control circuits, protective relays and the usual diagnostic tools (Fluke meters, insulation testers, thermal cameras, PLC software). Knowledge of NF C 15-100 or equivalent IEC standards and strict adherence to lock-out/tag-out procedures are essential. When you respond, focus on your experience with comparable...

I need a skilled programmer to create an HMI and PLC program for a Mitsubishi system. The setup includes 100 digital inputs, 100 digital outputs, and 15 analog inputs. The primary goal is monitoring and control, with data types as required. Key Requirements: - Experience with Mitsubishi HMI and PLC programming - Familiarity with environmental engineering applications - Ability to implement robust monitoring and control systems Ideal Skills and Experience: - Proficiency in PLC programming languages - Knowledge of environmental data parameters - Strong problem-solving and system integration skills Please provide relevant experience and approach in your bids.

I need a functional PLC-based simulation that accurately represents a conveyor system

I’m building a browser-based system that can read live values from several PLCs and scattered IoT sensors, show those readings instantly on a clean dashboard, and let authorised users push simple control commands back to the field. Think of it as a lightweight SCADA layer that runs entirely over the web. The app must: • Connect simultaneously to traditional PLCs and modern IoT devices—whatever protocol you prefer, as long as updates arrive in roughly one-second intervals or faster and command acknowledgements are rock-solid. • Store each data point so I can trend, search, and export history later; a time-series database such as InfluxDB or TimescaleDB is fine, but I’m open to other suggestions. • Stream readings to the UI in real time (WebSockets, MQTT, or...

...rails and replace them with a compact positioning system. Scope of Work • Mechanical design of compact 2-axis system • Mounting concept for pick opening • Modular approach • Simple enclosure (low IP requirements) • Servo-based positioning system • Fast and smooth motion • Single-point laser system • Microcontroller-based control (Arduino or similar) • Integration with existing PLC commands (activation, referencing, position, velocity, limits) • Control software, motion smoothing, and geometry compensation • Calibration method for accurate positioning Key Requirements Working area: up to 4000 × 820 mm Accuracy: ±20 mm Speed: full travel within ~2 seconds Environment: indoor, low dust, ...

My tmachine runs on a Siemens PLC and Omron servo drives. During the homing routine the X-axis servo no longer responds, even though the other axes behave normally. It used to move without any problem and I have not touched either the hardware or the software since the last successful run. I’m looking for someone who can jump on a quick remote session, go through the PLC program, the axis parameters and any relevant alarms, and pinpoint why the motor doesnt move. I also can share electrical diagram. I’ll provide the program files, drive parameter screenshots and live video of the machine so you can confirm the fix. Once the motor homes reliably, the job is done.

...Information and give me a actual price. If your plan is to increase the price after please do not reply. This is the exact information and its not a difficult page. No online sales just a landing page on wix for lead generation. Thanks 1. Hero Section (Above the Fold) Strong headline + sub-headline (use suggestions above) High-quality hero image: Professional control panel (open view showing PLC, relays, and clean wiring) or modern installed HVAC/building automation system Two clear CTAs: Request a Custom Quote (primary) See Flexible Options (secondary – scrolls to the options section) Trust bar: Innotech • Belimo • “Parts • Pre-Programmed • Complete Panels” 2. Flexible Purchasing Options (Very Important – Place this early and make...

I need a seasoned PLC developer to build a library of modular, fully-commented control programs that run flawlessly on both Siemens (TIA Portal and LOGO!) and Allen Bradley/ Rockwell (CCW) hardware. Each block should drop straight into a new project, adapt quickly to different I/O counts, and preserve three core benefits I must have: easy customization, noticeably improved functionality, and measurable efficiency gains. Here is the scope in more detail: • Write, test, and document reusable ladder or structured-text routines for common control-panel tasks—motor starts, VFD control, alarm handling, PID loops, network comms, HMI tag mapping, etc. • Validate code against wiring schematics, P&IDs, sequence charts, and any functional-design specs I supply. •...

I'm seeking an experienced professional to develop an industrial process simulation of a manufacturing assembly line using Siemens Simatic PLC software. Key Requirements: - Expertise in Siemens Simatic - Experience with industrial process simulations, specifically for manufacturing assembly lines - Ability to create realistic and functional simulations Ideal Skills: - Proficiency in PLC programming and simulation - Familiarity with manufacturing processes and assembly line operations - Strong problem-solving skills and attention to detail Please provide a portfolio or examples of similar work done.

...render (which I will share as soon as we start) already shows the overall layout, so you can focus on translating it into a clean, animated sequence rather than modelling ultra-fine details. Process to visualise, in order: • 3-step sedimentation tank • Activated-sludge tank with recirculation tube and a single sensor • Constructed wetland bed • Control panel housing an air compressor and PLC • Final collection tank with pump and sensor Keep component geometry to basic detail—simple shapes, clear colours, no micro-piping or bolts—so the viewer’s attention stays on how water moves and changes from stage to stage. Each stage should appear, animate, and label itself before the camera glides to the next, making the treatment flow...

...directly into the Siemens IPC427E and stream its sensor readings—temperature, pressure, and humidity—in real time. The controller is already deployed on the production floor; my goal is to capture those values continuously and expose them to an external application where they can be logged, visualised, and analysed. A working solution will: • Connect to the IPC427E without disrupting existing PLC logic. • Pull temperature, pressure, and humidity values as they change (sub-second latency preferred). • Forward or publish the data through a standard interface such as OPC UA, MQTT, REST, or a lightweight TCP socket—whichever you deem most robust for 24 × 7 operation. • Include a concise set-up guide detailing configuration inside T...

...testing, and documenting the system. Scope of work • Translate my functional goals for the automation system into a detailed instrumentation specification. • Recommend and size field instruments (flow, level, pressure, temperature, etc.) that align with industry standards and site constraints. • Prepare wiring diagrams, loop sheets, and I/O lists ready for integration with the control system (PLC/SCADA). • Support calibration and commissioning remotely (or on-site if practical), ensuring each loop performs to spec. What I’ll provide • Process descriptions, P&IDs, and any existing control philosophy. • Access to our engineering team for quick clarifications. Acceptance criteria • All instruments identified, tagged, an...

...sequence -Select controller platform -Define I/O list -Define architecture -Define communication philosophy Phase 2 – Hardware Selection -PLC selection -PC interface selection -Stepper driver selection -Sensor selection -Power supply sizing -Pneumatic component review Phase 3 – Controls Design -I/O mapping -Tag list -State machine -Interlocks -Fault matrix Phase 4 – Programming -PLC code -PC interface software -Modbus configuration -Motion setup Phase 5 – Electrical Design -Panel layout -Wiring diagrams -Terminal schedule -Power distribution Overview: A prototype including stepper motors, sensors and limit switches 24VDC. requirement to program, PLC, mapping, make ready to apply industry 4. in the future. Motor drivers and all compon...

We operate a fly ash brick manufacturing plant. Bricks are produced by a brick machine and come out on steel plates/pallets containing approximately 10–12 bricks per plate. Currently, workers manually pick up these plates using c...• Battery-powered system preferred. • Safety sensors and obstacle avoidance. • Complete mechanical, electrical, and software design required. Please include in your proposal: Relevant AGV/robotics/automation experience. Photos/videos of similar projects. Suggested technology (PLC, ROS, Arduino, Raspberry Pi, etc.). Estimated development cost. Estimated timeline. Whether you can provide prototype and final implementation support. Preference will be given to candidates with industrial automation, robotics, AGV, AMR, PLC, and mate...

I need an experienced controls technician to complete all on-site field wiring for a Siemens S7-1500 PLC panel that will operate in an indoor environment. The cabinet is already mounted and the devices are in place; what remains is terminating the incoming power feeds, I/O, network cabling, and field instruments, then powering up and testing. Scope • Dress, cut, and terminate all wires inside the panel, keeping routing clean and fully labelled to Siemens standards. • Land field cables on terminal blocks and the S7-1500 modules, following the provided wiring schedule. • Perform continuity and insulation checks, power-up verification, and I/O point-to-point testing with me present. • Update the as-built schematic with any field changes before handover. You ...

...data monitoring, robust alarm management, and detailed historical data logging. The plant’s PLC infrastructure will supply the field data, so every tag, alarm, trend, and script must integrate cleanly with those controllers. I will provide PLC tag lists, P&IDs, and naming conventions; you will configure the Intouch tag database, create graphic templates, and wire up communications. Key expectations • Screens: about 150, laid out logically by area (raw material, process, packaging, utilities, etc.) with dynamic objects, navigation, and pop-ups. • Features: live value display, color-coded status, alarm banners & summary pages, historical trending with filtering, and operator acknowledgments. • PLC integration: verified read/write t...

...rather than a full-blown industrial line. Here’s what I’m counting on you to handle from concept to commissioning: • Process design sized for ≤ 100 kg/day of mixed biomass • Detailed mechanical drawings, P&ID, and a complete bill of materials • Fabrication or clear fabrication instructions for reactor, condenser train, and ancillary equipment • Integrated heating and basic control scheme (PLC or Arduino-based is fine as long as temperature is held reliably) • Factory acceptance test showing steady production of bio-oil, plus a short run-up guide I can follow on site Key points you should factor in: fast or slow pyrolysis is acceptable as long as bio-oil yield is maximized; char and syngas can be considered by-products but d...

...existing PLC. The site is in the Gulf / Middle East region; exact identity is shared only with shortlisted bidders under NDA. What we need A new application that runs on the existing on-site industrial PC (no new production hardware) and communicates with the PLC over Ethernet using the S7 protocol (e.g. a snap7-class library), reading and writing an agreed tag set — possibly via a non-optimised "mirror" data block. The existing automation comprises a Siemens S7-300 fail-safe PLC (CPU 317F-2 PN/DP class); ET200S distributed I/O including an RS-485/serial-ASCII module carrying weather data; per-axis variable-speed drives (SINAMICS class); encoders and position switches; weather station(s); and managed Ethernet/PROFINET switches. Hard safety interloc...

I need support with a PLC control project in CODESYS 3.5. The task is to create a simple and understandable sequential control program for a chemical mixing tank / dissolver system The solution should be clean, well-structured, and easy to understand. It should be suitable as a small PLC demonstration project and should clearly show the step-chain logic, the input/output structure, and the control sequence.

I need an experienced controls engineer who can design and implement an Allen-Bradley PLC-based control system for a semi-automated production line at our New Jersey site. The focus is on reliable material-handling and packaging operations that tie smoothly into the machines already on the floor. Here’s what I’m after: • Create robust control logic in Allen-Bradley hardware (CompactLogix or ControlLogix preferred) that coordinates conveyors, actuators, sensors, and safety devices. • Build a clear, operator-friendly HMI that presents real-time status, alarms, and recipe management with minimal training required. • Integrate the new code with the existing machinery so startup and changeovers are fast and painless. • Deliver complete documentation...

I'm seeking an experienced controls engineer to design and implement a PLC-based control system for a semi-automated production line. The system will primarily manage material handling and packaging processes. Key Requirements: - Design control logic using Allen-Bradley PLCs - Integrate with existing machinery for seamless operation - Develop user-friendly HMI interfaces - Provide detailed documentation and support during installation Ideal Skills: - Proficiency in Allen-Bradley PLC programming - Strong background in industrial automation and controls - Experience with HMI development - Excellent problem-solving skills Please include examples of similar projects in your bids. Looking forward to your proposals!

I need support with a PLC control project in CODESYS 3.5. The task is to create a simple and understandable sequential control program for a chemical mixing tank / dissolver system The solution should be clean, well-structured, and easy to understand. It should be suitable as a small PLC demonstration project and should clearly show the step-chain logic, the input/output structure, and the control sequence.

I need the operational screens I currently run on a Unitronics PLC/HMI (built in VisiLogic) reproduced one-for-one inside the C-More environment. These screens drive day-to-day control of our equipment, so the new version must look and behave exactly like the original. What has to move across: the full graphical layout, every data-entry form, and all alarm pop-ups. The screens are used primarily for live control, so response time, button behaviour, and alarm acknowledgement flow must stay identical to what operators already know. I want the finished C-More project to visually match the Unitronics look and feel; colours, icons, fonts, and navigation order should be indistinguishable unless a C-More limitation forces a minor tweak. Deliverables • Complete C-More project file (*...

...containers • Conventional steel fabrication only, using processes commonly available in Tunisia and Libya (no exotic alloys or proprietary castings) • Robust automation: PLC-controlled sequencing of tipping, ramming and container exchange • Integrated safety: emergency stop buttons, safety interlocks and audible/visual alarms at all hazard points • Weather-resistant design suitable for hot, dusty coastal and desert environments Deliverables I expect 1. General arrangement, fabrication and detail drawings (DWG / STEP) 2. Hydraulic circuit, bill of materials and cylinder sizing calculations 3. Electrical & PLC I/O list, control logic diagram and HMI layout 4. Finite-element verification of main press frame and ram (SolidWork...

I need someone who can jump into my Schneider M340 PLC, pull down the current program, and pinpoint why the machine went into auto-stop. The fault appears to be an electrical issue rather than software or pneumatics. Here’s what I’m looking for: • Remote connection to the M340 (Unity Pro / EcoStruxure) • Quick review and backup of the running logic • Identification of the exact auto-stop trigger and the related I/O or protections • Clear explanation of the fault and the corrective action taken (or wiring changes I should ask my electrician to handle) • Confirmation that the error is cleared and the line restarts normally You must be comfortable working live on Schneider PLCs and documenting every change you make. As soon as we’re ...

I need support with a PLC control project in CODESYS 3.5. The task is to create a simple and understandable sequential control program for a chemical mixing tank / dissolver system The solution should be clean, well-structured, and easy to understand. It should be suitable as a small PLC demonstration project and should clearly show the step-chain logic, the input/output structure, and the control sequence.

...Assistance for Commercial Swimming Pool Control Panel Location: Australia (Remote acceptable) Overview I am seeking an experienced electrical engineer or switchboard compliance specialist to assist with the design verification, documentation, and compliance requirements for a commercial swimming pool control panel being manufactured in Australia. The control panel includes: * 3-phase 80A supply * PLC-based control system * Approximately 4 contactors * Approximately 10 relays * Approximately 10 circuit breakers * Motor and process control functions for commercial pool equipment * No VSDs currently included The enclosure size is approximately 800mm (W) x 1000mm (H) x 300mm (D). Scope of Assistance Required The successful freelancer should have demonstrated experience with A...